distortion control firmware for D90

j45j45 Posts: 7Member
edited April 2015 in Nikon DSLR cameras
My firmware version for my D90 indicates:
A 1.00
B 1.01
L 1.009 which nikon shows was issued on 2013/07/16
Nikon USA doesn't show a distortion control update (I think it was upgraded last Aug)
however Nikon EU does
It offers me (which I downloaded):
Product Name Distortion control data
Version 2.005
File Name S-DCDATA-002005WF-ALLIN-32BIT_.exe

Before i install in the camera, has anyone in the States upgraded their firmware with this: L 2.005? 2014/08/26
http://downloadcenter.nikonimglib.com/en/download/fw/108.html

just want to be sure i don't run into trouble as this was not referenced from the Nikon USA support page I think there was a link to Nikon EU

Thanks for a reply

Comments

  • haroldpharoldp Posts: 984Member
    I would not install firmware in a US nikon that was not sourced from Nikon US. There may be differences in the code and prior firmware or even hardware that will be catastrophic (bricking the device).

    You can do distortion control in Capture NX-D or Photoshop.

    .... H
    D810, D3x, 14-24/2.8, 50/1.4D, 24-70/2.8, 24-120/4 VR, 70-200/2.8 VR1, 80-400 G, 200-400/4 VR1, 400/2.8 ED VR G, 105/2 DC, 17-55/2.8.
    Nikon N90s, F100, F, lots of Leica M digital and film stuff.

  • IronheartIronheart Posts: 3,017Moderator
    From https://support.nikonusa.com/app/answers/detail/a_id/19190/~/d90-firmware---a:-1.00/-b:1.01

    D90 firmware - A: 1.00/ B:1.01
    Answer ID 19190|Published 08/25/2014 12:20 PM|Updated 08/26/2014 11:12 AM
    Question: How do I update my camera firmware for the D90 camera?
    This is the D90 A:1.00/ B:1.01 firmware upgrade download - Please review the information provided, and click the appropriate download at the bottom of the page.

    Modifications enabled with this upgrade of firmware, release date August 26, 2014
    Support for distortion control data Ver. L: 2.000 and later has been added.
    Camera firmware must be updated before distortion control data can be updated to Ver. L: 2.000 or later.
  • IronheartIronheart Posts: 3,017Moderator
    edited April 2015
    You can download the distortion control data at this link:

    From https://support.nikonusa.com/app/answers/detail/a_id/19335/related/1

    Which version of Distortion Control Data can I install?
    Answer ID 19335|Published 12/19/2014 01:33 PM|Updated 12/19/2014 01:33 PM
    Distortion control data can be used to correct barrel and pincushion distortion during shooting and editing. The data can be loaded into cameras that support distortion control.

    For the download, install procedure and the list of lenses for which distortion control data is included check the download pages linked below.
    Distortion Control Data version 2 supports the following cameras:
    Windows
    Macintosh

    Df: all firmware versions
    D4: firmware version A 1.10/B 1.10 and later
    D4S: all firmware versions
    D90: firmware version A 1.00/B 1.01 and later
    D600: firmware version C 1.02 and later
    D610: firmware version C 1.01 and later
    D750: all firmware versions
    D800: firmware version A 1.10/B 1.10 and later
    D810: all firmware versions
    D800E: firmware version A 1.10/B 1.10 and later
    D3200: firmware version C 1.03 and later
    D3300: all firmware versions
    D5200: firmware version C 1.02 and later
    D5300: all firmware versions
    D7000: firmware version A 1.04/B 1.05 and later
    D7100: firmware version C 1.02 and later
    Distortion Control Data version 1 supports the following cameras:
    Windows
    Macintosh
    D4: all firmware versions
    D90: all firmware versions
    D600: all firmware versions
    D800: all firmware versions
    D800E: all firmware versions
    D3100: all firmware versions
    D3200: all firmware versions
    D5000: all firmware versions
    D5100: all firmware versions
    D5200: all firmware versions
    D7000: all firmware versions
    D7100: all firmware versions
    Click Here for the latest DSLR firmware downloads.
    Post edited by Ironheart on
  • j45j45 Posts: 7Member
    Done -- Thank You!!
Sign In or Register to comment.